Cabinet and Bathroom Hardware Supply Store
For Product Support & Phone Orders:
813-633-7544 landline 813-362-7898 smartphone
Eclectic-ware in Wimauma, FL
Click our Eclectic-ware logo to return to our home page.
Click to view items in your cart
Title
Go to content

Wood Wine Bottle Racks

Omega-National section index

Omega-National wood wine bottle racks

This is one of the easiest wine bottle holders to set up in a cabinet. Both the front and back pieces are routed on their back sides to lip over a bottom frame piece in your cabinet, front and rear. You can attach them with high quality wood glue. Or with glue and pin nails. Maple, Oak, and Hickory are hardwoods, and always a good idea to predrill tiny holes first when considering nails. You might want to use your fancy air nailer, but be careful with it. Assembling a cabinet out in the open, you can set up some straight shots. Wiggling it around at uncomfortable angles inside a cabinet could sent a brad nail to Albuquerque instead of Wisconsin. Yes, a Buggs Bunny joke.

Omega-National wood wine bottle racks

About the Wine Bottle Racks

  • Wine bottle racks sold as a kit - front and back piece.
  • Front piece has smaller arcs cut in it to hold neck of bottle and tip it lower toward cork end.
  • Fine sanded and ready to finish, can be clear coated, stained, or painted.
  • Available in oak, maple, cherry, and hickory.
  • Both front and back pieces can be cut to length.
  • 48" long, both pieces.
  • Can be stacked and used in tiers (as shown in the picture above)
  • Should be mounted in firm cabinets.
  • Can be used with other Omega-National wood products such as stemware holders below them.
OMG-S9200CUF1
Manufacturer: Omega-National
Omega S9200CUF1 wine bottle rack kit 48'' long, unfinished cherry
Consists of front and back routed pieces with curved cuts
$85.66
Add
OMG-S9200HUF1
Manufacturer: Omega-National
Omega S9200HUF1 wine bottle rack kit 48'' long, unfinished hickory
Consists of front and back routed pieces with curved cuts
$67.08
Add
OMG-S9200MUF1
Manufacturer: Omega-National
Omega S9200MUF1 wine bottle rack kit 48'' long, unfinished maple
Consists of front and back routed pieces with curved cuts
$67.17
Add
OMG-S9200OUF1
Manufacturer: Omega-National
Omega S9200OUF1 wine bottle rack kit 48'' long, unfinished oak
Consists of front and back routed pieces with curved cuts
$61.18
Add

Ordering Notes:

Maple, Oak, and Cherry wine bottle racks are generally stocked and can ship right away.
Hickory is ordered as requested. General lead time on hickory is 10 to 15 business days for us to receive it. Direct ships are possible.

Money saving tip:
Depending upon the width of your cabinet, if it is 24" or less in interior width, one kit can get you two tiers like shown in the first color photo above.
Back to content