Currently 29 pictures will load below. They are all from customers of ours. Some are before and after photos and will be noted. Brief descriptions of the doors will follow too.
|
Design 504 mitered raised panel doors shown above. 504 4-lite mullion doors directly to the right. (ML4)
|
|
Design 301 doors on upper cabinets. Design 300 raised panel doors on lower cabinets. Drawer fronts are slab fronts with matching edge profile.
|
Design 300 raised panel doors with slab drawer fronts. Side view of kitchen to the left.
|
As you might have guessed, this is the before photo of the remodel to the right.
|
Series 700 RTF (rigid thermal foil) raised panel doors. Nice touch with the tile counters.
|
The before look.
|
Raised panel finished oak doors and valances.
|
Same kitchen as above - before look.
|
The remodel with raised panel oak doors.
|
Design 701 and 70 RTF doors - matte white.
|
Design 701 and 70 RTF doors - matte white.
6-lite mullion door in upper corner cabinet.
|
RTF mullion doors and drawer fronts.
|
Quality Doors are made to the sixteenth of an inch. Minimum sizes exist for each door design and that information is posted on each Series page in the
Quality Doors section of our web site. All doors are considered custom and made to order. Every kitchen, bathroom, laundry room, or entertainment center is different. You do not have to place generic doors on anything.
Select a wood door, RTF door, or melamine door and have them made for your application. We can offer tech support to some extent. When it comes to actual measurements, those are up to you to provide. Never hesitate to
relay your questions to us. We are here to help. |
This is the before look, and on the right ...
|
the after look. Design 100 and 10F doors and drawers with oak C-pulls.
|
 The same kitchen as directly above with a fuller view of the rest of the kitchen. Design 100 and 10F are
available with finished red oak C-pulls and J-pulls on the top and bottom, or on the top or bottom only if you wish. Custom made doors mean you specify how you want them. All doors can be made
to the 1/16". C-pulls and J-pulls come in 3 finishes: harvest, royal, and frost. Harvest shown in picture. Melamine doors available in white and almond.
|
Before refacing and installing new doors ...
|
after refacing and installing new doors. Design 301 4-lite mullion doors on top, design 300 raised panel wood doors below with slab drawer fronts.
|
Same kitchen as two pictures directly above. Just the other side. Picture to right is design 301 raised panel doors on uppers, design 400 slab drawer fronts below.
|
|
Again, same kitchen as above shown from other side of breakfast bar. Picture to the right is their refacing job. Kitchen is brighter and looks new. There is no need to replace cabinet boxes when you can reface them.
|
The new look.
|
A built-in entertainment center with doors closed.
|
Same entertainment center using
Accuride Flipper Door Slides,
also available through Eclectic-ware.
|
Customer designed and built a built-in closet unit using Frost Red Oak doors and 3-1/2" wide Frost face frame. To build your own face frame, order series 400 drawer
fronts with the 114 edge. Minimum width is 3-1/2", lengths up to 96". The following 3 pictures are enlargements of the unit above. |
|
|
|
Quality Doors have many uses. Armoires and entertainment centers have modern and traditional looks. With custom made wood cabinet doors, finished or unfinished, you can
achieve many looks. And when we say custom, we mean it. An example is: select a raised panel door design from series 300, select your wood species, then select a frame profile, a
panel profile, and an edge profile. Elect to have them finished or unfinished. And if you need a door 17-9/16" wide by 43-1/8" tall, you will get it. You are not stuck trying
to make a standard size fit, you order the size you need. Top of page |
