|
Quality Doors Series 400 Drawer Fronts |
Four color image sample drawer front pictures, line art denoting the various choices you have, profile links, and a table showing your various wood species will display below. Finish availability varies by
wood species. Drawer fronts can be ordered unfinished or finished. Watch the minimum size requirements in the charts below. What you need to know about series 400 drawer fronts:
You will have to select a drawer front design from the line art below, and an edge profile to create the look you will like. Profiles can be viewed on the profiles page. **** For normal SLAB drawer fronts, you will most likely select design 400 and then a matching edge to your doors. The
lineart below showing designs 415, 417, 418, 433, 439, and 476 are slab drawer fronts meant to mimic a raised panel look. These 6 designs do not have exact edge matches for the door edge profiles. So if you want an
exact edge match on your doors and drawer fronts, design 400 or 410 drawer front and the matching edge is the way to go. You also need to select a wood choice, and then state unfinished, or select from one of the
finish choices for that wood. Very few profiles are allowed for glazing. More detailed info on that is on the wood finishing page.
You will need to provide quanity and size info. Drawer fronts can also be bored for concealed hinges for flip fronts. Or when used as tall narrow slab doors.
This is an easy series to order from. There are not many options. You basically select a design and an edge. |
To view additional color images of drawer front choices for series 200, 300, 500, 700, and 800,
please select this link. Additional pictures are shown. |
Design 433 with special edge (raised panel look)
|
 Design 400 with 112R edge (outside radius)
|
 Design 400 with 132 edge
|
Design 439 with special edge (raised panel look)
|
Line art showing the "special edge designs" to create a raised panel look from a solid drawer front.
The edge profiles below are only available on drawer fronts. Min. 5" height requirement. |
|
Styles 400 and 410 are glued up. Styles 444 and 414 are solid "one-piece." Maximum height is 6". Designs 400, 444, 433, 439, and 476 are 3/4" thick.
Design 410, 414, 415, 417, and 418 are 15/16" thick. For optional edge profiles to match series 200, 300, 500, and 800, order drawer front style 400 or 444 and specify the same edge profile.
For a raised panel look, order special edged designs 439, 433, 476, 415, 417, or 418 as shown above. Grains run left to right on all drawer fronts. Your width is your left to right measurement. Height is up and down.
Specification table is below for availability of wood species. Additional color images pages to assist in your selections (all will have links to their parent data/info page for that series) series 200 | series 300 | series 500 | series 700 | series 800 | mullion doors | drawer fronts |
Quality Doors normally issues notice of changes a couple months before any will occur. Upon notification of changes, this web site will be updated to reflect those changes.
|
For wood selections, available finishes for each wood type, and minimum sizes (watch minimum size requirements), please refer to the table below: |
| |
3/4 inch thick drawer fronts |
15/16 inch thick drawer fronts |
Wood Species |
#400 (glued up) |
#444 (one piece) |
|
#410 (glued up) |
#414 (one piece) |
|
Red Oak, Knotty Alder, or Alder |
X |
X |
|
X |
X |
|
Ash |
X |
N/A |
|
X |
N/A |
|
Maple |
X |
X |
|
X |
X |
|
Paint Grade |
X |
N/A |
|
X |
N/A |
|
Cherry |
X |
N/A |
|
X |
N/A |
|
Knotty Pine |
X |
N/A |
|
N/A |
N/A |
|
Hickory |
X |
N/A |
|
N/A |
N/A |
|
White Oak |
X |
N/A |
|
N/A |
N/A |
|
Mahogany or Walnut |
X |
N/A |
|
N/A |
N/A |
|
Paint Grade Maple |
X |
N/A |
|
N/A |
N/A |
|
White Pine |
X |
N/A |
|
N/A |
N/A |
|
Poplar |
X |
N/A |
|
N/A |
N/A |
|
MDF |
Order 7DF without white back (raw). |
N/A |
N/A |
|
SELECT WOODS (click for explanation) |
Select Red Oak |
X |
X |
|
X |
X |
|
Select Ash |
X |
N/A |
|
X |
N/A |
|
Select Maple |
X |
X |
|
X |
X |
|
Select Cherry |
X |
N/A |
|
X |
N/A |
|
Select White Oak |
X |
N/A |
|
X |
N/A |
|
Minimum size (inches) width x height |
6 x 3½ |
6 x 3½ |
|
6 x 5 |
6 x 5 |
|
|
|
|