Three color image sample door pictures, line art denoting the various choices you have, profile links, and a table showing your various wood species will display below. Finish availability varies by wood
species. Doors can be ordered unfinished or finished. Watch the minimum size requirements in the charts below. What you need to know about series 800 doors:
You will have to select a door design from the line art below, and an "allowed" edge profile to create the look you will like. Profiles can be viewed on the profiles page. You also need to select a wood choice, and then state unfinished, or select from one of the finish choices for that wood. A
few profiles are allowed for glazing, most cannot be glazed. More detailed info on that is on the wood finishing page.
You will need to provide quanity and size info. Doors can be bored for concealed hinges. For series 800 doors you can just state "bore" since there are no arch top choices. If hinge up and down placement is different
from the norm, such as 5-1/4" OC from the bottom and 2-3/4" OC from the top, then left or right boring will become important to note again. This is only if you have special placement due to various reasons. This is an
easy series to order from. There are not many options. You basically select a design and an edge. There are no frame or panel choices in Series 800. |