Rev-A-Shelf slide out waste container replacement bins |
The Replacement trash bins are for the RVxxxxx series slides-out kitchen garbage cans. If you need the entire slide-out assembly with can, you can view the various slide-outs by clicking here or on the linked part numbers below. Measurements and pricing will be provided below the pictures of the replacement bins.
|
First picture shows: REV-RV-20-6, then REV-6700, then REV-RV-1024W.
 |
Second picture shows: REV-RV-35-8, then REV-RV-50-8, then REV-RV-50WL-8
The 35 qt can is also available with a lid. Order the lid separately.
|
This picture is just to show the REV-6700 on its side. The 30 quart REV-6700 can is also commonly used in the drawer slide out trash systems when the can fits down through and opening in the chassis
that is mounted toward the top of your cabinet opening.
|
The measurements below are those we took in April 2008. They may vary from the measurements published in the Rev-A-Shelf spec guide. And they can vary from 1/8" to 1/4" from time to time. But these are
the current measurements rounded to the nearest 1/8". They are the overall size measured at the top and then the height.
And because we are asked if the bins taper down in size at the bottom, we will also list the
bottom measurements of the cans. And then, we are also asked about the size under the top lip. So that measurement will be listed too. When ready to order:
via On-line, click here ~ via phone 813-633-7544 ~ via FAX, click here.
|
PART NUMBER |
SIZE and MEASUREMENTS |
FOR USE IN THESE TRASH UNITS |
PRICE |
REV-RV-20-6 |
20 Qt. 8-1/4" x 14-1/4" x 15-1/8" tall
Bottom = 6" x 12-3/8"
under lip = 6-3/4" x 13-1/4" |
RV8PB and RV14PB-S |
$13.91 ea |
REV-RV-1024W |
27 Qt. 10-3/4" x 11" x 17-7/8" tall
Bottom = 8-1/2" x 8-1/2"
under lip = 10" x 10" |
RV15PB2 and RV15PB2-S |
$18.22 ea |
REV-6700 |
30 Qt. 9-3/8" x 15-1/2" x 17-7/8" tall
Bottom = 6-1/2" x 12-1/2"
under lip = 8-1/4" x 14-1/4" |
RV9PB and old RV16PB2 |
$18.79 ea |
REV-RV-35-8 |
35 Qt. 10-1/4" x 14-1/8" x 17-7/8" tall
Bottom = 8" x 11-1/2"
under lip = 9-1/8" x 13" |
RV12PB and RV18PB2-S |
$19.28 ea |
REV-RV-50-8 |
50 Qt. 11-5/8" x 14-7/8" x 21-3/4" tall
Bottom = 8" x 11-7/8"
under lip = 9-3/4" x 13-1/2" |
RV12PB50 (unit w/o lid) |
$26.27 ea |
REV-RV-50WL-8 |
50 Qt. w/lid 11-5/8" x 14-7/8" x 22-1/2" tall
Bottom = 8" x 11-7/8"
under lip = 9-3/4" x 13-1/2" |
RV12PB50-S (unit with lid) |
$40.14 ea |
REV-RV-35-LID-1 |
Lid for RV-35-8 bin, sold as separate item |
|
$16.74 |
REV-RV-50-LID-1 |
Lid for RV-50-8 bin, sold as separate item |
|
$16.97 |
****WHEN ORDERING REPLACEMENT BINS, Please use the part numbers in the left hand
column above. The part numbers of the trash units that they are used in are only for reference. Lids for the 35 qt and 50 qt cans sold separately. Lids are also white.
All of the above bins are white rubberized
plastic. They are sold individually. Some RVxxxxx slide-out units have two bins each. Some bins are inverted in the RV units and slide into your cabinet sideways instead of lengthwise. A few of the RV slide-out units
are not shown on this web site, but are available. We will quote pricing upon request. The 'S' on the end of RV part numbers denotes full extension slides.
RV has nothing to do with RV motor homes. RV is just a series code for the Rev-A-Shelf slide outs. When looking to replace your old bins, please take careful note of the above measurements. Make sure your cabinet
width, depth, and height can accommodate these bins. Specifications have changed over the years and your bin may not measure precisely to the current measurements. Please be careful when ordering as the above part
numbers are similar. If you have any questions, please e-mail, or call us.
|
