 Granite handles
Desinger handles page
~ detailed photos of the granite drawer pulls
3" ctc, 5" overall length, 1-1/8" projection
|
On this page you will see 8 examples first of the Designer Handles to show the 8 metallic finish options. Then we will show all the
same metallic cradles with the different granite colors. The designer handles have a granite sleeve mounted over a ONE-PIECE
metal handle. The one piece metal handle adds greatly increased strength to the handle. You are not pulling on the granite as with
3-piece combination handles. The Turned In Stone designer handle is an exquisite design in natural stone decorative cabinet hardware.Part numbers (for the handle shown) and granite names are below each image.
Part number coding works like this: TIS-ACH.NVG
(TIS) = Turned In Stone identification; (AC) = metallic color of handle; (H) for designer handle; (NVG) = granite name, New
Venetian Gold in this example. Since we are showing the granite handles in only one base color, PLEASE REMEMBER to alter the part number in the metallic identification to reflect the handle color you would like.
Codes are: AB for antique brass; AC for antique copper; AP for antique pewter; BB for burnished brass; BN for black nickel; CH for polished chrome; PB for polished brass; and SN for satin nickel. Satin
nickel is the best compliment to stainless steel.
TIS-PBH.(granite color code or name) polished brass
TIS-CHH.(granite color code or name) polished chrome
TIS-ABH.(granite color code or name)
antique brass
TIS-BBH.(granite color code or name) burnished brass
TIS-SNH.(granite color code or name) satin nickel
TIS-BNH.(granite color code or name) black nickel
TIS-ACH.(granite color code or name) antique copper
TIS-APH.(granite color code or name) antique pewter PRICING:
Most designer handles from Turned In Stone are $17.20 each.
(Exception: *** these precious stone handles are priced higher, $24.95 ea. Azul Macauba, Blue King. [Azul Bahia not available in handles.]) Ordering information is on the How to order Turned In Stone page. Always e-mail us if you have any questions.
These are the standard granite colors that Turned In Stone purchases slab granite to cut. If you would like to supply your own
granite or stone to be used, the granite thickness MUST BE 1-3/16" to 1-1/4" thick in order to make the designer series handles. This thickness is also called 3cm.
Some pictures still need to be added and we will add them when photos are available. All photos are from Turned In Stone.
Note: colors on your monitor will vary. Some images show glare due to lighting and camera flashes. SPECIAL NOTE:
ALL TURNED IN STONE GRANITE KNOBS AND HANDLES COME STANDARD POLISHED. THEY ARE NOT JUST LACQUERED OVER, THEY ARE REALLY POLISHED. AND NOW TURNED
IN STONE WILL OFFER ALL KNOBS AND PULLS IN A HONED FINISH. A HONED FINISH IS SMOOTH, BUT NOT SHINY. IF YOU WOULD LIKE THE HONED FINISH, IT IS VERY
IMPORTANT TO STATE SO WHEN ORDERING. OTHERWISE, THE GRANITE PRODUCTS WILL BE MADE WITH THE STANDARD POLISHED FINISH.
|
An example of how Turned In Stone's designer handle can be used to hide previously drilled holes in your door and drawer fronts. The center to center screw hole spacing on this handle is 3" only. But
because of the length of the handle and its feet, you can hide up to 4-3/4" pre-drilled hole centers. So if you have one of the most popular size of predrilled holes (96mm, a.k.a. 3-3/4"), then this handle can cover
your existing holes. You will drill a new set of holes at 3" ctc, and it will work. In the first picture below, the handle on the right is mounted in the 3" hole spread. The handle on the left is covering up the 4-3/4"
spread. The 5" spread is too great to hide, and on the low end, the 2-3/4" spread is too close together to hide. This handle can fit 3" ctc's and hide up to 4-3/4" ctc. In the second picture, we laid one handle on its
side so you can see how the feet extend beyond the hole centers.
|
All of our Turned In Stone pricing is discounted. We have structured our pricing to be competative.
On larger orders of 50 or more combined pieces, we can extend an additional 5% discount. |
Shown first, the eight metallic color choices:
|
TIS-ABH.BB
antique brass base (ABH)
baltic brown
|
TIS-ACH.GVE
antique copper base (ACH)
giallo veneziano
|
TIS-APH.NVG
antique pewter base (APH)
new venetian gold
|
TIS-BBH.BP
burnished brass base (BBH)
blue pearl
|
TIS-BNH.CW
black nickel base (BNH)
cashmere white
|
TIS-CHH.BGA
polished chrome base (CHH)
black galaxy
|
TIS-PBH.BGA
polished brass base (PBH)
black galaxy
|
TIS-SNH.GVE
satin nickel base (SNH)
giallo veneziano
|
PLEASE REMEMBER to alter the part number in the metallic identification to reflect the handle color you would like. Codes are:
AB for antique brass; AC for antique copper; AP for antique pewter; BB for burnished brass; BN for black nickel; CH for polished chrome; PB for polished brass; and SN for satin nickel. (All handles below will be shown with the antique brass base.)
|
TIS-ABH.AB
absolute black
|
TIS-ABH.AW
arctic white
|
TIS-ABH.AM
Azul Macauba***
|
TIS-ABH.BB
baltic brown
|
TIS-ABH.BGA
black galaxy
|
TIS-ABH.BK
Blue King***
|
TIS-ABH.BP
blue pearl
|
TIS-ABH.BGR
butterfly green
|
TIS-ABH.BC
bianco carrara
|
TIS-ABH.BS
bianco sardo
|
TIS-ABH.CBL
cambrian black
|
TIS-ABH.CI
cafe imperial
|
TIS-ABH.CW
cashmere white
|
TIS-ABH.DM
dakota mahogany
|
TIS-ABH.EP
emerald pearl
|
TIS-ABH.GVE
giallo veneziano
|
TIS-ABH.GVI
gold viara
|
TIS-ABH.GL
golden leaf
|
TIS-ABH.IBL
ivory brown light
|
TIS-ABH.IB
impala black
|
TIS-ABH.JC
juperana columbo
|
|
TIS-ABH.JGO
juperana golden oak
|
TIS-ABH.KI
kinawa
|
TIS-ABH.LA
labrador antique
|
TIS-ABH.NA
nara (Caladonia)
|
TIS-ABH.NVG
new venetian gold
|
TIS-ABH.PA
paradiso
|
TIS-ABH.PG
pocono green
|
TIS-ABH.PO
polychrome
|
TIS-ABH.RB
rosa beta
|
TIS-ABH.RP
rosa porrino
|
TIS-ABH.SC
santa cecilia
|
TIS-ABH.SCL
santa cecilia light
|
TIS-ABH.SB
sapphire brown
|
TIS-ABH.SS
silver sea green
|
TIS-ABH.SI
sivakashi
|
TIS-ABH.TB
tan brown
|
TIS-ABH.TA
toasted almond
|
TIS-ABH.TRB
tropic brown
|
TIS-ABH.VE
verde esmerelda
|
TIS-ABH.VF
verde fontaine
|
TIS-ABH.VL
verde larvas
|
TIS-ABH.VM
verde maritaka
|
TIS-ABH.VSF
verde san francisco
|
TIS-ABH.VU
verde ubatuba
|
TIS-ABH.VI
violetta
|
|
Be certain to view Turned In Stone's Architectural handle designs.
They can be viewed on the Architectural series page.
|
Check out the NEW vanity faucets with granite handles Turned In Stone page links:
Designer knobs |
Designer handles | Ferrule style knobs | Diamond ferrule style knobs
Big mushroom knobs |
Small mushroom knobs | Architectural series granite knobs and drawer pulls
Granite bath hardware, towel bars, towel rings, TP holders
Granite corner shelves or granite soap dishes
Bathroom and vanity water faucets with granite accent handles
How to order Turned In Stone | Granite colors page |
Mounting examples page If you are ready to place an order, please select this link. You can e-mail or call us with your questions.
|
Turned In Stone has certain material thickness requirements in order to make their knobs and pulls.
This chart will aid you in determining which knobs and pulls can be produced from your thickness. |
knob or pull design |
3/8" (1cm) thick |
3/4" (2cm) thick |
1-1/4" (3cm) thick |
Designer knob |
yes |
yes |
yes |
Designer handle |
no |
no |
yes |
Ferrule knobs (all six shapes) |
yes |
no |
no |
Diamond ferrule knobs (all 6 shapes) |
no |
yes |
yes |
big or small mushroom knobs |
no |
no |
yes |
style AA |
yes |
yes* |
no |
style AB |
yes |
yes* |
no |
style AC |
yes |
yes* |
no |
style AD |
no |
yes* |
yes |
style AE |
no |
yes* |
yes |
style AF |
no |
yes* |
yes |
style AG |
no |
no |
yes |
style AH |
no |
no |
yes |
style AI |
no |
no |
yes |
style AJ |
no |
no |
yes |
* Styles AA, AB, AC will be made taller with 3/4" thick stone.
* Styles AD, AE, AF will be made shorter with 3/4" thick stone.
|
|
UNIFORM DECORATIVE HARDWARE NAVIGATOR |
|
Previous
Collection |
Change
brands |
Next
Collection |
|
|
CUSTOM ORDERS (matching or supplying your own stone):
You can supply a small sample of your stone for Turned In Stone to match to. OR, if you would like to supply your own stone to have an exact match to your counter top, you can. The following conditions must be met
however.
In order to make any of the flat ferrule style knobs, your stone MUST BE 3/8" thick (1cm). 3/8" tiles can be used. For the 6 new diamond ferrule knobs, your stone needs to be at least 3/4" thick and up to 1-1/4" (3cm). In order to make the designer series knobs, your stone can be anywhere from 3/8" to 1-1/4" thick. In order to make the designer series handle or the Big or Small mushroom knobs, your stone MUST BE 1-3/16" to 1-1/4" thick. These are the only thicknesses Turned In Stone can work with. For the Architectural Series, Turned In Stone needs to evaluate a small piece of your stone first to see if it can be fabricated for these designs. For the AA, AB, and AC designs, 3/8" thick tile is used. For AD through AJ 1-3/16" to 1-1/14" thick slab is used. A special exception for 3/4" thick stone: 3/4" thick granite can be used to make parts AA, AB, AC, AD, AE, and AF. The first three will end up thicker than pictured on the Architectural Series page and the latter 3 will be a little less tall. At this time, customer supplied stone cannot be used for towel bars, TP holders, and towel rings.
|
