cabinet pulls hard to find center to center measurements

Eclectic-ware cabinet knobs and cabinet pulls, bathroom hardware, wall switch plates, wall tiles, under cabinet lighting, cabinet doors and more.

Cabinet knobs and cabinet pulls for kitchen cabinets, bathroom cabinets, and bedroom and living room furniture. Our products are for new home construction, kitchen and bath remodeling, furniture building, and home improvements. We offer Accuride TV swivels, custom made cabinet doors, kitchen storage accessories, undercabinet lighting, granite knobs, Corian knobs, rustic knobs and handles, European Railing and stainless steel T-bar handles. We have bath hardware from Lenape, Rock Solid, Siro, and Turned In Stone. Corian, wood, porcelain, stainless steel & aluminum switchplates. Vanity sink faucets too.

Please add this eclectic-ware.com leader page to your favorites for future reference.

Featuring: Accuride, Amerock, Arthur Harris, Belwith-Keeler, Bucksnort Lodge, Cerastone, Classic Brass, C&R Woodcrafters, Glover & Smith, Hera Lighting, Lenape, Metro Metal Works, Mrs. H's Handles, Omega Hardwood Products, Out To Lunch (Premier Hardware) , Quality Doors, Rev-A-Shelf, Rock Solid, Siro Designs, and Turned In Stone.
SOME SPECIFIC PRODUCT SUMMARY PAGES:
CABINET KNOBS AND CABINET PULLS | STAINLESS STEEL HARDWARE | SWITCHPLATES | WOOD HARDWARE | CABINET HINGES | BATHROOM ACCESSORIES

Our Cabinet Hardware and Bathroom Hardware products are available to everyone: homeowners, contractors, cabinet makers, woodworkers, hotels, designers and architects, and any do-it-yourselfer. Pricing is shown for all products except custom made cabinet doors; cabinet doors are quoted as requested. We ship anywhere in the USA, US territories, Canada, Europe, Australia, and many other countries! Please place your orders on-line, via fax, mail order , or they can be phoned in.

Decorative
Hardware

Bath
Hardware

Functional
Hardware

under cabinet lights

Switchplates

Corian

Gibraltar, etc.

Porcelain

Wood switchplates


	SECURE on-line ordering

Got a tough hole center to center problem? Find answers here.

Tell a friend about our site!

Site
Navigator

My holes are already drilled and I cannot find pulls to fit.

This is one of the most common questions we get.
Below is a quick reference to some common and unusual hole center to centers.
And a few suggestions follow toward the bottom of the page.

1-1/2" ctc:
Siro adjustable stainless steel handles

1-3/4" ctc:
Siro adjustable stainless steel handles

2" ctc:
Siro adjustable stainless steel handles

2-1/4" ctc:
Siro adjustable stainless steel handles

2-1/2" ctc:
Siro: Lancaster | Stainless Steel
Siro Nuevo Classico cup pulls are 2-1/2" ctc's.
Siro adjustable stainless steel handles
Arthur Harris will make stainless steel pulls in 2-1/2" centers upon request.
Rock Solid Corian pulls - some can be made shorter to accommodate 2-1/2" ctc.

2-3/4" ctc:
Turned In Stone Architectural Series available in 2-3/4" ctc upon request.
Out To Lunch will make their pulls in 2-3/4" ctc. on request.
Siro Metro pulls can be set at 2-3/4" if you wish.
Siro adjustable stainless steel handles
Arthur Harris will make stainless steel pulls in 2-3/4" centers upon request.
Rock Solid Corian pulls - some can be made shorter to accommodate 2-3/4" ctc.
Siro Nuevo Classico cup pulls can hide 2-3/4" ctc's
Classic Brass cup pulls can hide 2-3/4" ctc's.

3" ctc:
Most of the Amerock line is 3" ctc.
Most of the Belwith-Keeler line is 3" ctc.
Siro adjustable stainless steel handles
Rock Solid has many 3" ctc. pulls.
Out To Lunch has 3" ctc. pulls.
Classic Brass has 3" ctc. pulls.
Turned in Stone granite pulls.
Arthur Harris will make stainless steel pulls in 3" centers upon request.

3-1/4" ctc = Arthur Harris will make stainless steel pulls in 3-1/4" centers upon request.
Siro adjustable stainless steel handles

3-1/2" ctc:
Amerock: Wire Pulls
Siro adjustable stainless steel handles
Rock Solid has several 3-1/2" ctc. pulls.
Out To Lunch by special request.
Arthur Harris stainless steel pulls
Classic Brass Georgetown, Hatteras, Captiva, St Georges collections

Note: 96mm or 3-3/4" is aVERY popular handle size. We have a lot of choices....

3-3/4" (96mm) ctc:
Most of the Siro line is 96mm.
Siro adjustable stainless steel handles
Arthur Harris stainless steel pulls in 3-3/4" ctc.
Rock Solid have several 96mm pulls.
Out To Lunch by special request.
Classic Brass in some collections.

4" ctc:
Amerock: Wire Pulls
Siro adjustable stainless steel handles
Arthur Harris stainless steel pulls in 4" ctc.
Rock Solid has several 4" ctc. pulls.
Out To Lunch by special request.
Classic Brass Montana, Hatteras, Santa Fe collections

Adjustable ctc pulls from 2" to 4"
Siro Metro collection
Adjustable ctc pulls from 1-1/2" to 5-1/2"
Siro Stainless steel collection

4-1/2" ctc:
Arthur Harris stainless steel pulls

5-1/2" ctc:
Arthur Harris stainless steel pulls
Siro adjustable stainless steel handles

6" ctc:
Classic Brass Montana, Santa Fe Collections

6.3" ctc:
Siro: Lenox | Stainless Steel

7-1/2" ctc:
Arthur Harris stainless steel pulls

7.55" ctc:
Siro: Chicago | Stainless Steel

8" ctc:
Classic Brass Santa Fe collection

8.8" ctc = Siro Casa Vecchia

9-1/2" ctc:
Arthur Harris stainless steel pulls

12" ctc:
Classic Brass Montana Collection

12.6" ctc:
Siro: Chicago | Stainless Steel

Pulls longer than 12"
Siro Stainless Steel | Siro European Railing
Siro Impala collection
Out To Lunch pantry and refrigerator pulls
Arthur Harris stainless steel bar pulls
Classic Brass Montana collection

Mrs. H's Handles has some 8" to 10" long pulls.

Wide feet or flared pulls:
Siro: Lancaster | Rialto
Rock Solid pulls
Turned In Stone

Pendant Pulls:
Siro: Evangeline | Nuevo Classico

Ring Pulls:
Siro: Evangeline | Nuevo Classico

Swing Bail Pulls:
Siro: Casa Vecchia | Nuevo Classico
Classic Brass: Georgetowne, Santa Fe collections

center to center hole diagram

The above pull represents a style from Rock Solid and also a granite pull style from Turned In Stone. Rock Solid will make theirs in 2-3/4", 3", 3-1/2", 96mm and 4"ctc's. Turned In Stone granite pulls are 3" ctc. The screws go in approx. where the measurement lines are.

This style of pull has such long feet that it can hide hole spacings longer than its ctc. So a 3" ctc. pull can hide holes up tp 4-1/2" apart, etc. The holes may be seen from the back of your drawer or door, but not from the front. This is a good pull to use when such a dilemma exists.

The above diagram shows how you can elongate one hole to accommodate a pull that is "almost" right on for the center to center measurement. You can elongate one with a drill bit or tiny file. You want your screws to thread straight or you run the risk of damaging your pull and it could sit crookedly on your cabinet. One-tenth of an inch is not going to show or damage your cabinet. When tight, the pull will not shift because the other hole is still round.

The easiest way to make an oval hole is by scraping your turning drill bit side to side. Be careful not to break your bit. Gentle up and down movement of the drill while applying pressure sideways will work.

The diagram above shows how two holes can be elongated inward or outward. Sometimes 1/8" on each end is all you need to make a pull 1/4" longer or shorter work for you. Again, the pull will not shift when mounted; either the inward edges or outward edges will hold it in place. This method is good for keeping your pulls centered on drawer fronts. Most people will not notice 1/10" as in the diagram to the above right. For vertical mounting, you may have some upward or downward play unless your pull is mounted dead center in a raised panel door.

This is an example of what NOT TO DO. This is not a safe or advised method. It is very difficult to drill a hole next to a hole and you leave very little door stock material between holes, if any. A good tug on a pull could cause it to break the barriers and damage your door or drawer front. It is common to use a backplate + pull combination to hide existing holes. If the new holes you drill are too close to the old holes, you may damage your cabinet one day. Consider filling your old holes with wood putty for added strength first. Then use your pull + backplate combination.

We sincerely hope the above has been helpful to you.
Your comments are welcome at any time.
Please let us know how our service has been.

If you would like to order ONE custom made knob, cabinet handle, switchplate, cabinet door, or anything else, Eclectic-ware has no minimum order. When you are not certain, it is best to order one or two first.
As for all the other cabinet, kitchen, and bath hardware we offer, please order what you need.
There are no restrictions on quantity. Anything can be ordered one at a time if you like.

Click the above BBB logo to review our company report.

We accept VISA, MC, American Express, and Discover. Our on-line ordering form is a secure server. We also accept phone and fax orders too.

Click here to order.

Select this link to view our products summary.

SUPPORT AMERICAN SMALL BUSINESSES. WE ARE AMERICA'S ECONOMIC GROWTH!

If you encounter any difficulty with our web site, please e-mail, call, or fax us with your questions.
Customer service phone (813) 633-7544
Hours: Mon-Thurs 9 AM to 6 PM; Fri 9 AM to 5 PM; Sat 1 PM to 5 PM E.S.T.

Eclectic-ware
3110 Turkey Walk Lane, Wimauma, FL 33598, USA
Phone (813) 633-7544 -- FAX (813) 634-3400 -- E-mail us

All manufacturers' hardware pictures contained in this web site are the property of the respective manufacturer.
You may freely distribute any literature you print from this web site for the promotion of the cabinet hardware products.
Some pictures have been altered by Eclectic-ware for clarity on your screen.
We ask that you do not post any pictures copied from this web site onto other web sites. Thank you.
© Copyright 2000-2007 John W. Wagonis --- Eclectic-ware in business since 2000.

TV swivels, flipper door slides
ACCURIDE

decorative cabinet hardware, hinges
AMEROCK

stainless steel bar style cabinet handles, knobs
ARTHUR HARRIS

decorative cabinet knobs and pulls
BELWITH-KEELER

wildlife, sport themes, cabinet hardware
BUCKSNORT LODGE

stone look cabinets knobs, ancient Greece, Rome
CERASTONE

decorative cabinet hardware, hinges
CLASSIC BRASS

custom wood switchplates
C&R WOODCRAFTERS

under cabinet lighting, halogen lights
HERA LIGHTING

fine pewter cabinet knobs and pulls
GLOVER & SMITH

porcelain bath hardware, switchplates, knobs
LENAPE

stainless steel switch plates, address plaques
METRO METAL WORKS

exotic knobs and pulls, bath hardware
MRS. H's HANDLES

stemware holders, wine bottle racks
OMEGA

fine pewter cabinet handles and knobs
OUT TO LUNCH

custom made kitchen cabinet doors
QUALITY DOORS

slide out trash cans, kitchen accessories
REV-A-SHELF

Corian cabinet knobs, pulls, switchplates
ROCK SOLID

decorative cabinet hardware, stylish hooks
SIRO DESIGNS

granite cabinet knobs, pulls, faucets
TURNED IN STONE

Eclectic-ware decorative cabinet knobs and door handles,
pocket door hardware, TV swivels, custom cabinet doors,
bathroom hardware, wall switchplates, stainless steel handles, and
kitchen hardware & accessories. Tampa to Sarasota, Florida based.