Our Stainless Steel cabinet pulls displayed in a customer's kitchen

pictures compliments of Sandy P., Libertyville, IL

 

The 2 customer pictures below show the BS Series pulls: these are the 1/2" bar dia. handles.

Bar rail style handles, also called European Railing, or Euro Rails can be made to length as you see in the pictures below. The cabinet door heights vary and so do the cabinet handles. Look at the two handles over the top of the range hood, they are approx. 6 to 7" tall, then on the two cabinet doors surrounding the range hood, they are near 26 to 28" tall, almost the full height of the door. You don't want your handles to extend past the edges of your doors, that would look bad. You can bring them right to the edge if you want to. But generally, they should be inset from the edge at least 1/4" and possibly up to 2 or 3". It depends upon your cabinet door style and your overall preference. The handles are made to length and you determine how you want them to look. Those in Jim and Sandy's kitchen below stretch almost the entire height of their upper cabinet doors, and near the full width of their base cabinet doors. And the roll out drawers below their oven and cook top have the handles horizontally. Pulls can be mounted horizontally and vertically. On their base cabinets they chose to mount them horizontally across the tops. This does allow you to grab the handle without extra effort in bending lower. Just remember which way the doors open from. Might confuse a few of your guests now and then.

If you look closely, you can see that the tall handles on their pantry doors to the left of the fridge have the 3rd mounting standoff near the horizontal panel divider on their cabinet doors. The extra standoff on longer handles adds to greater strength of the handle. If by chance you are interested in some really nice shaker style cabinet doors, please visit the Woodmont Doors section of our web site. We thought we'd toss in that plug since the cabinets below look really nice. We did not supply these doors. But we have them.
 

Jim & Sandy's kitchen has shaker style light cherry cabinets.
The countertops are Midnight Green Granite.
The pulls are Arthur Harris high quality stainless steel bar pulls.
Notice the uniform look of mounting the pulls vertically the near full height of their doors,
and horizontally the near full width of their doors and drawer fronts.

Arthur Harris stainless steel cabinet pulls in kitchen example

Arthur Harris stainless steel European Railing



Eclectic-ware has Arthur Harris Volume Discount Specials
Shown on each Arthur Harris page.

Side view of the bar pulls.
Arthur Harris stianless steel cabinet handles


The following links are pages in the Arthur Harris section of our web site. They are shown at the top of each Arthur Harris page too.
7/8" dia Stainless steel knobs
Stainless steel long pulls
5/8" dia Stainless steel knobs
Stainless steel long pulls with legs positioned at ends
Stainless steel T-pulls
Back to back mounted stainless pulls
Pictorial Customer Testimonial (pulls shown mounted in a kitchen)

NOTE: The 5/8" knobs, 7/8" knobs, and T-pulls can also have back to back mounting if you need this. Please select this link to view information on ordering back to back mounted hardware. Back to back mounted hardware is commonly found on glass doors, shower doors, and passage way doors. The typical kitchen cabinet door has no need of a back to back mount.

Solve your odd size hole center to center problem.
Answers here.

Got 2-3/4", 3-1/2", or any crazy size
?

We ship orders worldwide.  We have had many customers from Canada, England, Australia and other predominately English speaking nations that we advertise in.  We have shipped all througout Europe, and to several Asian, African, and South American countries.
We ship everywhere:

friends
Tell a friend about Eclectic-ware

Navigate back to any section of our web site using these links:

Or navigate by our product category pages:

Close-out products:

HOME > ARTHUR HARRIS > And then SELECT from these product pages while in the ARTHUR HARRIS section of our website:

made to length kitchen door handles | 7/8" dia. cylinder knobs | 5/8" dia. cylinder knobs
end to end style door handles (legs toward ends) | stainless steel T-pulls (one leg)
back to back mounted handles (one on each side of the door | customer testimonial w/ pictures

cc-symbols5

When you are ready to place your order, please open our on-line ordering form here
Or you can place a phone order from 9 to 5 Mon-Fri EST, call us at 813-633-7544 or 813-362-7898.
You can FAX or mail in orders too.

SUPPORT AMERICAN OWNED & OPERATED SMALL BUSINESSES

 

Eclectic-ware is a distributor of cabinet and bathroom hardware
Eclectic-ware

3110 Turkey Walk Lane
Wimauma, FL  33598  USA
(Greater Tampa to Sarasota area)
Phone: 813-633-7544
FAX: 813-634-3400
website: www.eclectic-ware.com

EclecticWare is a BBB Accredited Home Kitchen Cabinetry Equipment Supplier in Wimauma, FL
A+ rated business since 2003

Customer service hours
& phone (813) 633-7544
and (813) 362-7898 cell
Mon-Fri 9 to 5 E.S.T.
24/7 FAX and on-line ordering.
Anyone can purchase from us!
 

© Copyright 2000-present ~ John W. Wagonis | Established Dec. 2000 | County license # 146460
Home | Sitemap | Our Blog | Contact Us | About Us | How to order page
Testimonials |
F.A.Q. | Return policy | Privacy policy

Are you a little lost?

 

Eclectic-ware kitchen cabinet hardware and bathroom accessoriesArthur Harris Cabinet Drawer Pulls and Door Knobs - Stainless Steel choices

813-633-7544 main line -- or 813-362-7898 cell
for phone orders, product questions, & design assistance.

Click here to order. Visa, MasterCard, American Express, Discover card accepted by Eclectic-ware
Click for the BBB Business Review of this Kitchen Cabinets & Equipment - Household  - Shipping throughout the entire USA, Canada, and worldwide

We are a cabinetry and bathroom hardware supply store open to everyone!
Please remember the hyphen (-) in Eclectic-ware and in our web address: www.eclectic-ware.com

HOME | PRODUCTS | MANUFACTURER INDEX | CONTACT US | SITEMAP | RESOURCES | BLOG