Cabinet and Bathroom Hardware Supply Store
For Product Support & Phone Orders:
813-633-7544 landline or 813-362-7898 smartphone
Eclectic-ware in Wimauma, FL
Click our Eclectic-ware logo to return to our home page.
Click to view items in your cart
Title
Go to content

Cabinet Door Design Charleston Arch Maple

Woodmont Doors section index
(And links to all pages, including individual door design pages, are in all Woodmont Doors page footers.)

Charleston Arch Maple raised panel door from Woodmont Doors

This is the only arch top design the Woodmont offers. You would primarily want to use these on upper cabinets only. Using an arch top door on base cabinets with a rectangular drawer front above them just does not look right. Some people have done it, but we reserve saying that arch top doors look best up top.

This is also a raised panel door. Option of a flat panel, the RRP panel, is not an option. BUT, the option of frame only or mullion doors is an option. On the quotation and ordering form, there is a check box to note GL or DL. GL means glass door option, or frame only. You will have one large opening, no panel. Then you get to fit the door for glass yourself. You would need to have that done with a local glass supplier. The DL means, divided lites, thus a mullion door. On an arch door, you would most likely have only 2 columns of lites. And then the height of the door will determine if you have 2, 3, or even 4 rows of lites. A typical upper cabinet door of 24 to 30" tall, you may want to make it only a 4-lite mullion door (DL4). But if you have really tall upper cabinet doors, well over 30", a 6-lite (DL6) mullion design would look very nice. Cabinet doors used on furniture, such as a dining room china plate display, could have a pair of arch top mullion doors. If you have doors in the 48 to 60" height range, an 8-lite (DL8) mullion design would look good. Each mullion lite should be a square at a minimum, or taller than they are wide to look good. A mullion lite that is actually wider than it is tall is going to look way wrong. That might work on a Shoji screen, but not on your upper cabinet doors.

The Charleston Maple door is the complimentary square top raised panel door that you can use on your base cabinets. Profile combination is identical.
Woodmont Doors Charleston Arch Maple raised panel door
Charleston Arch Maple
Minimum door size 9-1/2" w x 7" h (note the wider width requirement of 9-1/2")
Minimum drawer front size 6" w x 3-1/2" h (shown on Charleston Maple page)
3/4" thick 2-1/8" frame with plywood panel
Was referred to as the old Woodmont 205-W-1-CLB door.
The CLB edge is square on the side and back, but has a drop and wave on the front.
Available in all 15 maple colors shown below.

There is not a RRP option for this door design. Raised panel only.

Profiles: W frame 2-1/8", P1 raised panel, CLB edge.

Then you can tap or click the colors after that to see the full size Charleston Arch Maple doors with their color names.
Woodmont Doors W frame panel profile
Woodmont Doors CLB edge profile
Woodmont Doors P1 raised panel profile
The Charleston Arch Maple door comes only as a raised panel door. There is not option of the RRP. Complimentary drawer front will be shown on the Charleston Maple page. Slab front only. There isn't a 5-piece raised panel front. This is the only door style that Woodmont offers in an arch top door.

If requesting hinge boring, very important to state Left or Right side boring.

How to order:

To start an order or to request a no-obligation quote, select the Charleston Arch Maple design choice on our on-line quotation and ordering form. That link will open it in a new window so you can keep this window open if you need to. Enter all your data, then the door quantities and sizes, drawer fronts, finish color, hinge boring if needed, all pertinent data. All quotes are done on-line or via FAX. We have a FAX form you can fill out for those who still like FAX machines.

For matching square top raised panel doors and slab drawer fronts, you would select the Charleston Maple design.

Extras like cut to size matching plywood, self-adhesive veneer, and decorative moldings can be requested on the ordering / quotation form also.

Then the quote / order is taken care of by a person. It is not automated from our website. Allow a day or two for someone to get back to you.
Back to content