Cabinet and Bathroom Hardware Supply Store
For Product Support & Phone Orders:
813-633-7544 landline or 813-362-7898 smartphone
Eclectic-ware in Wimauma, FL
Click our Eclectic-ware logo to return to our home page.
Click to view items in your cart
Go to content

Cabinet Door Design Quincy Maple

Woodmont Doors section index
(And links to all pages, including individual door design pages, are in all Woodmont Doors page footers.)

Quincy Maple plywood panel door from Woodmont Doors

In April of 2022, Woodmont Doors stopped offering cabinet doors to the public. We still have cabinet doors available.
Use these links to jump to something appropriate:
This Quincy Maple design has the mortise and tennon corners, but a bit more scrolly inside frame profile. So this is not a true shaker look because of the scroll work. It is a more refined plywood panel design. The door frame is solid maple, 3/4" thick. Plywood panel is a real veneer panel when ordering any of the translucent stain colors that show the grain through them. For any of the solid stain colors, the panel is an MDF plywood panel.

If you opt to order your doors unfinished, you have two choices: stain grade maple which will have a door with the veneer panel. Or paint grade maple which will have the door with the MDF plywood panel. The drawer front regardless of finished or unfinished is solid maple.

The plywood veneer panel will have grain lines that run up and down. On the slab drawer fronts if you choose to order some, the grain will run left to right. If you choose the Quincy5 design shown a bit lower on the page, the plywood panel on the matching drawer front will have a vertical grain. BUT, if you opt for the RRP choice, then the panel on the drawer front will have a horizontal grain. Whenever you may have any questions about how that works, please ask us.
Quincy Maple
Minimum door size 7-1/2" w x 7-1/2" h
Minimum drawer front size 6" w x 3-1/2" h
3/4" thick 2-5/8" frame with plywood panel
Was referred to as the old Woodmont 400-WL-PRE door and 500-PRE slab drawer front.
The PRE edge has a couple of scroll dips to it. A bit more fancy.
Note, at one time Woodmont had a PRE-FF edge which was a longer cut to give the appearance of a mock raised panel look on a slab front. THIS IS NOT THAT. The PRE edge is the same edge but not cut deeper into the middle of the front. Drawer front will have the slab appearance.
Available in all 15 maple colors shown below.

If selecting the Quincy RRP Maple (reversed raised panel), minimum door size becomes 8" x 8".

Profiles: W frame 2-5/8", plywood panel, PRE edge. If selecting the RRP panel, panel 0 is the solid wood reversed panel.

Then you can tap or click the colors after that to see the full size Quincy Maple door and drawer fronts with their color names.
Woodmont Doors Quincy Maple plywood panel cabinet door
Woodmont Doors PRE edge profile
Woodmont Doors W frame panel profile
Woodmont Doors reversed raised panel P0
Woodmont Doors plywood panel for kitchen cabinet doors
Woodmont Doors Quincy5 Maple plywood panel door

Quincy5 Maple door and drawer front design

There is another option to the Quincy design. The Quincy5. The 5 after the name means that the drawer front choice comes as a matching 5-piece drawer front. So if you would like a matching 5-piece flat panel drawer front instead of the slab front, select the Quincy5 Maple when you start your quotation request or order. A picture of the Quincy5 design is shown next.

For the 5-piece drawer front, the minimum size requirement is 6-1/2" x 4-1/4" when selecting the plywood panel. If selecting the RRP panel, then 8" x 5-5/8". Thus if you require any drawer fronts less in height, you would need to order the slab drawer fronts. 5-piece drawer fronts have a narrower top and bottom rail to accommodate lesser height requirements. M&T corner doors have this luxury of narrower rails. When selecting from the various miter corner designs, all 4 frame pieces are alway equal size.

How to order:

To start an order or to request a no-obligation quote, select the Quincy Maple design or Quincy RRP Maple choice on our on-line quotation and ordering form. That link will open it in a new window so you can keep this window open if you need to. Enter all your data, then the door quantities and sizes, drawer fronts, finish color, hinge boring if needed, all pertinent data. All quotes are done on-line or via FAX. We have a FAX form you can fill out for those who still like FAX machines.

Qunicy5 Maple and Quincy5 RRP Maple would be your selection choices if you desire the matching 5-piece drawer fronts.

Extras like cut to size matching plywood, self-adhesive veneer, and decorative moldings can be requested on the ordering / quotation form also.

Then the quote / order is taken care of by a person. It is not automated from our website. Allow a day or two for someone to get back to you.
Back to content