Hera Lighting StickVE-LED value engineered linear light fixtures

The StickVE-LED is a low profile surface or recessed mounted linear LED light. Used in commercial shelving displays and residential kitchen applications

The StickVE-LED come in 8", 12", 34", and 46" lengths. You can connect them end to end and create long lengths of light with seamless joints. They are ultracompact strips of LED lighting with an even light output. They are approx. 30% less bright than the normal Stick2-LED version. You can space the lights apart using flexible connecting cables in 4" or 21" lengths. These cables also allow you to bend corners and mount the lights on alternating planes. The lights are very slim and easy to hide under your cabinet or shelf. They are lightweight and can be mounted horizontally or vertically. You can mount them to picture frame borders, mirrors, or other areas where you may like to outline something special in the home. The StickVE-LED can also be recessed in a channel if you like. With virtually no heat output, you do not need to worry about venting the lights.

Hera Lighting StickVE-LED economical linear LED lights

StickVE-LED lights

What to order & How to order: (more ordering notes after the part number grid)
Each light is 2 to 11 watts. You can run up to 8 feet of lights on a 30 watt power driver. Or use the 6 watt power driver on light runs of 24" or less. The KB12LEDCC extension cables are only needed if you have to mount your lights farther away from the attached terminal block location on the power driver. Dimming units and accessories are optional. Power drivers plug directly into the wall and can be turned on and off with a switch controlled outlet. If you use dimmers, then those also will act as your power on and off switches. If you have questions about terminal blocks, cables, or anything else, please call or e-mail us.
Extended information on LED power driver at this link.

Part numbers and prices for items listed above are in the grid below. Some items are stocked, others are brought in when ordered. In most cases, anything that we do not keep in stock, we will receive in 4 to 6 days. When ordering, please use the part numbers below shown with the HER- prefix before them. The orange Click Here to Order box will open up our secure on-line ordering form in a new window.

Click-here-to-order3 or you can call in orders to 813-633-7544, Florida, USA

The discounted volume price applies to larger purchases per item in the quantity stated or greater quantity.







StickVE-LED light 8" long, 2 w, warm white


$37.48 ea @ qty 20+



StickVE-LED light 12" long, 3 w, warm white


$55.32 ea @ qty 20+



StickVE-LED light 34" long, 8 w, warm white (old part # STICKVE/34/WW)


$184.39 ea @ qty 10+



StickVE-LED light 46" long, 11 w, warm white (old part # STICKVE/46/WW)


$237.01 ea @ qty 10+



StickVE-LED light 8" long, 2 w, cool white


$37.48 ea @ qty 20+



StickVE-LED light 12" long, 3 w, cool white


$55.32 ea @ qty 20+



StickVE-LED light 34" long, 8 w, cool white (old part # STICKVE/34/CW)


$184.39 ea @ qty 10+



StickVE-LED light 46" long, 11 w, cool white (old part # STICKVE/46/CW)


$237.01 ea @ qty 10+


LED Power Drivers, Dimmers, Switches, and Accessories


Constant voltage driver 6 watt max. (4 ports)



item stocked by Eclectic-ware 


Constant voltage driver 30 watt max. (12 ports)



item stocked by Eclectic-ware 


Constant voltage driver 75 watt max. (12 ports)



item stocked by Eclectic-ware 


Terminal Block extender for voltage drivers



item stocked by Eclectic-ware 


Dimming module for STICKPS voltage drivers



item stocked by Eclectic-ware 


Dimmer control for STICKPSDIM and PSLED/DIM



item stocked by Eclectic-ware 


Distributor cable to allow one dimming controller to control two dimming modules.



item stocked by Eclectic-ware 


Remote control dimmer - complete unit



item stocked by Eclectic-ware 


Motion activated infrared switch





On-Off rocker switch (power control to lights)





39" long power cable extension



item stocked by Eclectic-ware 


98" long power cable extension



item stocked by Eclectic-ware 


98" power cord VE (needed to lead off light run)





4" connecting cable - VE version





Cover profile for recessed channel mounting




Click-here-to-order2 or you can call us at 813-633-7544, Florida, USA

Ordering notes:
The StickVE-LED lights can be connected end to end, and the connections overlap, so you do not see dull spots. If you combine an 8" light with a 12" light, it will appear to be one 20" long light. The connecting cables can be used to go around corners or to hop uneven surfaces, or to branch through cabinet light rails.

The STICKVE/PC power cable is necessary for each run of lights. It is the lead cable from the power supply to the FIRST light in a string of lights. Light #2 and onward can connect directly to each other, or be distanced apart with the STICKVE/CC connecting/extension cables. If you are running more than one line of lights out of the same power supply, you will need a STICKVE/PC to lead off each of these branches. And you can do that. You can centralize a power supply and run lights in several directions from it. The 6 watt power supply is only going to power up to 3 of the 8" lights, or up to 2 of the 12" lights. You cannot exceed 6 watts on it. For longer runs, the 30 watt power supply is recommended. There are no feed-in stick options with the StickVE-LED like there are with the regular Stick2-LED and the higher output Stick2HO-LED. The StickVE-LED are for runs up to 8' long. If you need to go longer than that, you will just need to start a fresh run at the end of a run and have a small blank spot between them. Or use the Stick2-LED system.
Any questions, please e-mail us.

Additional info / resources:
The StickVE-LED are a value engineered light with diodes that last approx. 30,000 hours, and they do have about 30% less light output than the regular Stick2-LED lights. The Stick2HO-LED and the Stick2-LED are rated for 50,000 hour life cycles. Since the VE version have about 30% less light output, we do not recommend them in applications where you want to set up dimmable lights. If you want linear lights that you can dim, consider the other two versions of the Stick2 LED lights.

Hera Power Supply / Power Driver information for lights shown on this page:
SELECT THIS POWER SUPPLY LINK to view readable graphics of the thumbnail images below.
Specifications, part numbers, Instructions and diagrams for the LED power drivers and dimmers specific to the lights on this page are shown.
Hera STICKPS24/30 LED power driver | Hera LED dimmers DIMCONTROL PSLEDDIM | LED dimming accessories for Hera STICKPS power supplies | Stick power driver and dimmer diagram | Remote control dimmer diagram

link to previous collection Previous Hera page | Hera Lighting product index | Next Hera page link to next collection

Hera Lighting from Eclectic-ware

Solve your odd size hole center to center problem.
Answers here.

Got 2-3/4", 3-1/2", or any crazy size

We ship everywhere:

Tell a friend about our web site!

Navigate back to any section of our website using these links:

Or navigate by our product category pages:

Close-out products:

HOME > HERA LIGHTING > Please SELECT from these pages while in the HERA LIGHTING section of our website:
Linear LED: Stick2-LED | Stick3-LED | StickVE-LED | Twinstick2-LED | SlimLite XL-LED | ELite-LED
LED Power Supplies: LED power drivers and dimming accessories
Spotlight LED: R55-LED | FR68-LED | KB12-LED | ER-EQ-LED | EYE-LED | HO-LED
Swivel Spotlight LED: SR68-LED | Big6/2-LED | HO-LED
Tape LED: Tape Basic-LED (196" coils)
Arm LED Lights: Edonroc-VE-Flex-LED | Stem-LED
OTHER: KB12 halogen | ARF/ARFS halogen | ER1-ES1 halogen (E1) | Xenon | SlimLite T4 & T5 fluorescent | Old blade SlimLite info | Low voltage halogen light transformers and dimmers
PARTS: Hera Replacement Parts (rings, lenses, bulbs) | Discontinued lights left in our stock
Why Choose Hera Lighting? | Kitchen lighting examples | Store fixture examples | Commercial lighting examples


When you are ready to place your order, please open our on-line ordering form here
Or you can place a phone order from 9 to 5 Mon-Fri EST, call us at 813-633-7544 or 813-362-7898.
You can FAX or mail in orders too.



Eclectic-ware is a distributor of cabinet and bathroom hardware

3110 Turkey Walk Lane
Wimauma, FL  33598  USA
(Greater Tampa to Sarasota area)
Phone: 813-633-7544
FAX: 813-634-3400
website: www.eclectic-ware.com

EclecticWare is a BBB Accredited Home Kitchen Cabinetry Equipment Supplier in Wimauma, FL
A+ rated business since 2003

Customer service hours
& phone (813) 633-7544
and (813) 362-7898 cell
Mon-Fri 9 to 5 E.S.T.
24/7 FAX and on-line ordering.
Anyone can purchase from us!

© Copyright 2000-present ~ John W. Wagonis | Established Dec. 2000 | County license # 146460
Home | Sitemap | Our Blog | Contact Us | About Us | How to order page
Testimonials |
F.A.Q. | Return policy | Privacy policy

Are you a little lost?


Eclectic-ware kitchen cabinet hardware and bathroom accessoriesHera Lighting Under Cabinet Lighting - LED Spotlight and Linear Lights

813-633-7544 main line -- or 813-362-7898 smartphone
for phone orders, product questions, & design assistance.




Click here to order. Visa, MasterCard, American Express, Discover card accepted by Eclectic-ware
Click for the BBB Business Review of this Kitchen Cabinets & Equipment - Household  - Shipping throughout the entire USA, Canada, and worldwide

We are a cabinetry and bathroom hardware supply store open to everyone!
Please remember the hyphen (-) in Eclectic-ware and in our web address: www.eclectic-ware.com