Hera Lighting TapeBasic-LED flexible LED accent lighting for large applications


The TapeBasic-LED is a flexible linear LED used for accent lighting for furniture, kitchens, closets, stairwells, and various other residential applications

Designed for accent lighting, and now task lighting. The TapeBasic-LED lights work from the same power supplies as the Stick2-LED, TwinStick, the KB12, R55-LED, FR68-LED, etc. So if you are installing any of those in or under your cabinets, with the simple hookup of a TAPE-BASIC power cord to the same power driver, you can add some TapeBasic-LED lights to the entire border of your kitchens, or hallways. The TapeBasic-LED is flexible, if you need to place it on arched surfaces, you can. But you do not want to put a bend in them, the are not designed to fold over corners. If you need accent lighting on walkways or long hallways, this is an ideal light system for that.
 

Hera Lighting TapeBasic-LED flexible linear lights

Hera TapeBasic-LED lights part numbers

What to order & How to order:
The TapeBasic-LED comes in 3 light levels, refered to as B3, B6, and B12. What B3, B6, and B12 mean is: the B3 has 300 LED diodes per roll, the B6 has 600, and the B12 has 1200. Thus the B12 is 4 times brighter than the B3, also more expensive. A full 196" coil is 16.33 feet (5000mm). The Tape can be cut into shorter sections at the interval points for the specific TapeBasic you are using. Thus the B3 can be cut at 4" (100mm), the B6 at 2" (50mm), and the B12 at 1" (25mm). The cut joints are measured in metric, we just rounded off the numbers in inches. So for longer lengths, remember, it will be in millimeters. Thus if you cut the B3 at 112", the true cut point is 2800mm (approx. 110-1/4").  Seamless connection makes adding smaller pieces together appear as if they were never severed. The KB12LEDCC extension cables are only needed if you have to mount your lights farther away from the attached terminal block location on the power driver. Dimming units and accessories are optional. Power drivers plug directly into the wall and can be turned on and off with a switch controlled outlet. If you use dimmers, then those also will act as your power on and off switches.

If you have questions about terminal blocks, cables, or anything else, please call 813-633-7544 or e-mail us.
Extended information on LED power driver at this link.

Part numbers and prices for items listed above are in the grid below. All TapeBasic-LED lights and cables are brought in as ordered. In most cases, we will receive them in 4 to 6 days. When ordering, please use the part numbers below shown with the HER- prefix before them. The orange Click Here to Order box will open up our secure on-line ordering form in a new window.


Click-here-to-order3 or you can call in orders to 813-633-7544, Florida, USA

We are going to add some color coding to the cells below to show you which items work together. The B12 version of the TapeBasic is all soldered connections. Where as the B3 and B6 are quick snap connections.

PART NUMBER

DESCRIPTION

PRICE EACH

HER-TAPE/B3/196/2700

20 watt coil 196" long (5M), 300 diodes per coil, 108 Lm/ft., 2700K warm white, can be cut in 100mm intervals, max. of 315" per power cord

$140.93

HER-TAPE/B3/196/3000

20 watt coil 196" long (5M), 300 diodes per coil, 108 Lm/ft., 3000K warm white, can be cut in 100mm intervals, max. of 315" per power cord

$140.93

HER-TAPE/B3/196/4000

20 watt coil 196" long (5M), 300 diodes per coil, 108 Lm/ft., 4000K cool white, can be cut in 100mm intervals, max. of 315" per power cord

$140.93

HER-TAPE/B6/196/2700

40 watt coil 196" long (5M), 600 diodes per coil, 216 Lm/ft., 2700K warm white, can be cut in 50mm intervals, max. of 256" per power cord

$278.99

HER-TAPE/B6/196/3000

40 watt coil 196" long (5M), 600 diodes per coil, 216 Lm/ft., 3000K warm white, can be cut in 50mm intervals, max. of 256" per power cord

$278.99

HER-TAPE/B6/196/4000

40 watt coil 196" long (5M), 600 diodes per coil, 216 Lm/ft., 4000K cool white, can be cut in 50mm intervals, max. of 256" per power cord

$278.99

HER-TAPE/B12/196/2700

80 watt coil 196" long (5M), 1200 diodes per coil, 432 Lm/ft., 2700K warm white, can be cut in 25mm intervals, max. of 196" per power cord (but, if cut, cannot be spliced beyond 98-7/16" per power cord)

$447.75

HER-TAPE/B12/196/3000

80 watt coil 196" long (5M), 1200 diodes per coil, 432 Lm/ft., 3000K warm white, can be cut in 25mm intervals, max. of 196" per power cord (but, if cut, cannot be spliced beyond 98-7/16" per power cord)

$447.75

HER-TAPE/B12/196/4000

80 watt coil 196" long (5M), 1200 diodes per coil, 432 Lm/ft., 4000K cool white, can be cut in 25mm intervals, max. of 196" per power cord (but, if cut, cannot be spliced beyond 98-7/16" per power cord)

$447.75

LED Power Drivers, Dimmers, Switches, and Accessories

HER-TAPE/B/PC79/N8

79" power cord for B3 and B6

$5.79

HER-TAPE/B12/PC98/N

79" power cord for B12 only

$

HER-TAPE/B12/PC39/N

39" power cord for B12 only

$

HER-TAPE/B/CC2/N8

2" connecting cable for B3 and B6 (notCC1 as indicated in catalog graphic)

$1.39

HER-TAPE/B/CC6/N8

6" connecting cable for B3 and B6

$3.27

HER-TAPE/B/CC12/N8

12" connecting cable for B3 and B6

$3.56

HER-TAPE/B12/CC2/N

2" connecting cable for B12 only

$

HER-TAPE/B12/CC8/N

8" connecting cable for B12 only

$

HER-TAPE/B12/CC98/N

98" connecting cable for B12 only

$

HER-KB12LEDCC39

39" power cord extension

$4.41

HER-KB12LEDCC98

98" power cord extension

$6.37

HER-TAPE/B/DC/N8

Direct connector for B3 and B6

$1.06

HER-TAPE/B12/DC/N

Direct connector for B12 only

$

HER-TAPE/B/EXT1/78

Metal extrusion 78" long

$14.51

HER-TAPE/B/EXT1/LC/78

Clear lens for metal extrusion

$8.80

HER-TAPE/B/EXT1/LF/78

Frost lens for metal extrusion

$8.80

HER-PS24V/06/S

Constant voltage driver 6 watt max. (4 ports)

$34.52

HER-PS24V/30/S

Constant voltage driver 30 watt max. (12 ports)

$69.31

HER-PS24V/75/S

Constant voltage driver 75 watt max. (12 ports)

$138.63

HER-PS24V/96/DIM/S

Constant voltage driver 96 watt max with built in dimming capability, has DC connector on it. Needs PS24V/TB/DC to convert to terminal block connection for 24 volt cables.

$147.56

*HER-PS24V/TB/DC

Terminal block converter, used only with PS24V/96/DIM/S.

$11.31

HER-STICKPSDIM

Dimming module for STICKPS voltage drivers

$34.93

HER-DIMCONTROL

Dimmer control for STICKPSDIM and PSLED/DIM

$104.04

HER-STICKDIM/YCABLE

Distributor cable to allow one dimming controller to control two dimming modules.

$14.32

HER-RCPSDIM

Remote control dimmer - complete unit

$128.43

HER-IRSWITCH

Motion activated infrared switch

$26.98

** TAPE/B12 items will have special ordering criteria. If you need TAPE/B12, best to order on the phone, because: All B12 Tape and accessories are soldered connections. And Hera will cut them to length and solder the power cables onto your lengths for you. Thus on the B12, you do not need to order by the full coil. We have to ask Hera for pricing on each set up. So on the B3 and B6 versions, those are easy, order a coil, cut it as you need, attach what you need. But on the B12, it is "custom," and Hera will cut and sell it by custom lengths.
 

Click-here-to-order2 or you can call us at 813-633-7544, Florida, USA

Ordering notes:
The B3 and B6 version will use the TAPE/B/PC/N8 power cord to lead off a string of the Tape light. Multiple runs can come out of the terminal block on any transformer as long as you do not exceed the wattage on the transformer. The B3 and B6 can give you options for running longer lines of Tape from the same transformer . The B12 has some limitations. The B12 is a more advanced set up since ALL connections are soldered. The B12 does NOT use the same quick connectors / cables that the B3 and B6 versions do. The note on the Hera catalog page about the B12 version having a limit of 98-7/16" PER POWER CORD refers to if it is cut and then SPLICED to another piece. The two or more pieces cannot exceed the 98-7/16". If you are making one cut, a single piece up to 196" can be used from one power cord (TAPE/B12/PC39/N or TAPE/B12/PC98/N). When you have questions, do ask us.
 


Additional info / resources:
The Tape-LED has a more rigid construction and a protective covering. The Tape-LED comes in 12" strips and is suited for smaller applications. The TapeVE-LED is designed as an economy version.
 

Hera Power Supply / Power Driver information for lights shown on this page:
SELECT THIS POWER SUPPLY LINK to view readable graphics of the thumbnail images below.
Specifications, part numbers, Instructions and diagrams for the LED power drivers and dimmers specific to the lights on this page are shown.
Hera STICKPS24/30 LED power driver | Hera LED dimmers DIMCONTROL PSLEDDIM | LED dimming accessories for Hera STICKPS power supplies | Stick power driver and dimmer diagram | Remote control dimmer diagram

link to previous collection Previous Hera page | Hera Lighting product index | Next Hera page link to next collection

Hera Lighting from Eclectic-ware

Solve your odd size hole center to center problem.
Answers here.

Got 2-3/4", 3-1/2", or any crazy size
?

international-shipping-logo2
We ship everywhere:

friends
Tell a friend about our web site!

Navigate back to any section of our website using these links:

Or navigate by our product category pages:

Close-out products:

HOME > HERA LIGHTING > Please SELECT from these pages while in the HERA LIGHTING section of our website:
Linear LED: Stick2-LED | Stick3-LED | StickVE-LED | Twinstick2-LED | SlimLite XL-LED | ELite-LED
LED Power Supplies: LED power drivers and dimming accessories
Spotlight LED: R55-LED | FR68-LED | R68-LED | KB12-LED | ER-EQ-LED | EYE-LED
Swivel Spotlight LED: SR68-LED | Big6/2-LED | HO-LED
Tape LED: Tape-LED | Tape Basic-LED (196" coils)
Arm LED Lights: Edonroc-VE-Flex-LED | Stem-LED
OTHER: KB12 halogen | ARF/ARFS halogen | ER1-ES1 halogen (E1) | Xenon | SlimLite T4 & T5 fluorescent | Old blade SlimLite info | Low voltage halogen light transformers and dimmers
PARTS: Hera Replacement Parts (rings, lenses, bulbs) | Discontinued lights left in our stock
Why Choose Hera Lighting? | Kitchen lighting examples | Store fixture examples | Commercial lighting examples

cc-symbols5

When you are ready to place your order, please open our on-line ordering form here
Or you can place a phone order from 9 to 5 Mon-Fri EST, call us at 813-633-7544 or 813-362-7898.
You can FAX or mail in orders too.

SUPPORT AMERICAN OWNED & OPERATED SMALL BUSINESSES

 

Eclectic-ware is a distributor of cabinet and bathroom hardware
Eclectic-ware

3110 Turkey Walk Lane
Wimauma, FL  33598  USA
(Greater Tampa to Sarasota area)
Phone: 813-633-7544
FAX: 813-634-3400
website: www.eclectic-ware.com

EclecticWare is a BBB Accredited Home Kitchen Cabinetry Equipment Supplier in Wimauma, FL
A+ rated business since 2003

Customer service hours
& phone (813) 633-7544
and (813) 362-7898 cell
Mon-Fri 9 to 5 E.S.T.
24/7 FAX and on-line ordering.
Anyone can purchase from us!
 

© Copyright 2000-present ~ John W. Wagonis | Established Dec. 2000 | County license # 146460
Home | Sitemap | Our Blog | Contact Us | About Us | How to order page
Testimonials |
F.A.Q. | Return policy | Privacy policy

Are you a little lost?

 

Eclectic-ware kitchen cabinet hardware and bathroom accessoriesHera Lighting Under Cabinet Lighting - LED Spotlight and Linear Lights

813-633-7544 main line -- or 813-362-7898 smartphone
for phone orders, product questions, & design assistance.

 

 

 

Click here to order. Visa, MasterCard, American Express, Discover card accepted by Eclectic-ware
Click for the BBB Business Review of this Kitchen Cabinets & Equipment - Household  - Shipping throughout the entire USA, Canada, and worldwide

We are a cabinetry and bathroom hardware supply store open to everyone!
Please remember the hyphen (-) in Eclectic-ware and in our web address: www.eclectic-ware.com

HOME | PRODUCTS | MANUFACTURER INDEX | CONTACT US | SITEMAP | RESOURCES | BLOG