Woodmont Doors
Series 500 slab wood cabinet drawer fronts - for kitchens, bathrooms, desks, file cabinets, closets, and furniture

Series 500 slab drawer fronts can be used with any series of door. All the matching edges are available when used in conjunction with Series 200 and 400 doors. When used with Series 100 or 300 doors, the RAD, 118, SUN, and RB edges can be requested to match to the mitered corner doors.

Style 500FF-PRE slab drawer front is a one-piece drawer front meant to give the impression of a raised panel front. It is still one piece, comes only with the PRE edge, but it is an extended inward version of the PRE edge. The 500FF-PRE has a minimum height requirement of 5" due to the extra design in it. Other slab drawer fronts noted as design 500-(edge choice) can be made as short as 3-1/2" tall.

For information on matching 5 piece drawer fronts that match series 100, 200, 300, and 400 doors, please review those respective door pages. Links to them in the left hand column of this page. There will also be pictures on this page to show you options between slab and 5-piece. For 5-piece drawer fronts, they generally have a greater height requirement to be made. All that info is on the door pages as well.

We will begin this page with two color photos so you can see the definition of a "slab" drawer front. In the upper border of this page are navigation links to all pages within the Woodmont Doors section of our web site. Some will give you advice on hinges, measuring, installing, etc. We do offer options for on-line quotations and fax quotation requests. All quotations are done by us, not a robot. Allow us a day or two, sometimes three to get back to you.

Woodmonrt Doors plywood panel cabinet doors -  shaker style kitchen cabinet doors
Design 500-118 slab drawer front shown above door.
Min. height requirement for the 500 slab drawer front is 3-1/2"
Design 400 door, E frame 118 edge.
The ever popular Shaker style door.
Shown in Autumn Oak finish.
Min. width 6-1/2", min. height 6"
Autumn Oak veneer on face frame.

Woodmont Doors raised panel wood kitchen cabinet doors - autumn oak finsh doors
Design 500FF-PRE slab drawer front - gives a mock raised panel look to it. The 500FF-PRE comes only with the PRE edge, and the cut of the edge is extended further into the drawer front, giving the center the appearance of being raised. Min. height 5".
Design 200 raised panel door shown below it.
Shown in Autumn Oak finish.

Slab drawer fronts shown in conjunction with a couple of 5-piece drawer fronts. Sometimes it is just a matter of personal choice which drawer front style you choose to go with your doors. When you are restricted by height, your choice is made for you. But no one is saying that a slab drawer front has to be short. If you have a bank of drawers in your kitchen with a short drawer on top, but two taller drawers below, you can use slab drawer fronts for 12" or 14" tall drawers. If you are making a custom wood file cabinet for your home office, slab drawer fronts could be used for strength, as well as raised panel drawer fronts. And with many edge choices to pick from, you can create several nice looks.
Woodmont Doors slab drawer fronts - matching wood drawer fronts for your kitchen cabinets

The below graphic shows the Edge choices for slab drawer fronts. All of the below edges are also available on all doors in series 200 and 400. Series 100 and 300 doors have 4 edge choices that come standard on the mitered corner frames. Those edges are shown below too and are available on design 500- drawer fronts.

Edge profiles for Woodmont Doors plywood panel cabinet doors. Eclectic-ware.

Door pricing is done via a request on our on-line quote form, fax form, or over the phone (for short lists). And yes, the cabinet doors and accessories can be shipped ANYWHERE in the USA. Doors can be shipped to Canada and other countries too.

All drawer fronts are available in Red Oak, Maple, Cherry, or Hickory woods. Paint grade available too.

Drawer fronts can be ordered unfinished, or you can request finishing from the choices available.
If you are planning to order "finished" drawer fronts, please select this link to view the finish choices .
The page will open in a new browser window or tab so you can flip back and forth easily.
If you are planning on finishing your doors and drawer fronts yourself, or your contractor or cabinet maker will finish them, then ignore looking at that page.

Two additionally important pages you should review in regard to getting a quotation for a complete kitchen or bathroom refacing job are listed below. If you are looking only for drawer fronts at this time, then you do not need to spend time on those pages.
Hinge boring and hinge information
Moldings, veneer, and cut to size finishing plywood.

How to price doors & drawer fronts for you kitchen, bathroom, or other project:
There will not be pricing posted on the individual door pages. Please request a no-obligation quotation via on-line or via fax. We can do "small" door quotations over the phone, but do not call us with a big long list. That is more suited for submission via on-line. PLEASE READ OVER THE NEXT PARAGRAPH for the info we need to provide you with an accurate quotation.

How to order series 500 slab drawer fronts (DF):

  • This is quite simple, pick a matching edge choice to your doors, this is the most common approach
  • Select a wood choice: Red Oak, Maple, Cherry, Hickory, or paint grade
  • Select: unfinished or finished. If finished, tell us which finish (finish options)
  • If finished and you want a glaze finish too, be certain to state the glaze color (BUT DO NOTE: in the diagram above, it states which edges can be glazed. Some do not have a crevice to catch glaze within, thus they cannot be glazed.)
  • Enter all your DF quantities and sizes in inches (examples: 15-1/4, 32-1/16, 6-1/2, no need for " marks)
  • If you need certain drawer fronts bored for concealed hinges, that can be done. State boring option #1 or #2 (hinge info). It is not common, however. Most of the time drawer fronts are fixed firmly on drawer boxes.

On-line ordering page or quotation requests | FAX quotation - ordering page


Below will just be additional color DF and door images to assist you with your selections. The main information about choosing your drawer fronts, measurement minimums, and all order data is from this point UPWARD on the page.

Woodmont Doors raised panel wood kitchen cabinet doors - cider chery finish
Design 200 door shown with design 200F drawer front above. The 200F drawer front is 5-pieces just like the doors, all 4 frame pieces will be equal width, and the minimum height requirement is 7" tall. For shorter height raised panel drawer fronts, design 200FC, min. height requirement is 5-1/2". Top and bottom rails will be narrower than side frame rails. For drawer fronts 3-12" tall to 5-7/16, order design 500 with the matching edge to your doors.
Shown in Cider Cherry finish.

Woodmonrt Doors plywood panel cabinet doors - wide frame shaker style doors
Design 400 door, E3 frame, 118 edge.
Design 400FC S3-118 drawer front. Notice that top and bottom rails are narrower than left and right rails.
3" wide frame choice. Available on all series 200 and 400 door frames. Standard size is 2-1/8". Mid size is 2-3/8".
2-3/8" and 3" frames carry an upcharge.
Shown in Cider Cherry finish.
Door: Min. width 8-1/4", min. height 8-1/4" because of the 3" wide frame choice.
Drawer front: Min. width 8-1/4", min. height 4-1/2" because of the 3" wide frame choice. (Top and bottom rails will be narrow, only left and right rails are 3".)

Woodmont doors slab drawer fronts
Drawer front design 500FF-PRE.
Shown in Ginger Cherry finish.
Min. width is 6", min. height is 5-1/2".

Woodmont doors slab drawer fronts - kitchen slab drawer fronts
Drawer front design 500FF-PRE.
Shown in Autumn Oak finish.
Min. width is 6", min. height is 5-1/2"

Woodmont Doors wood beaded plywood panel cabinet doors and drawer fronts - kitchen cabinet doors - mitered corner beaded plywood panel drawer front for cabinetry
Design 385F drawer front with 'B' plywood panel. Shown in Espresso Maple finish with almond glaze.

Please note, the 385F drawer front has a minimum height requirement of 6-1/2". If you have drawer fronts less in height and would like a matching beaded panel look, order them as 385FC. The 385FC has a minimum height requirement of 5-1/2". And drawer fronts under 5-1/2" in height will need to be requested as the 500-(edge choice) slab drawer fronts.

Woodmonrt Doors plywood panel cabinet doors - shaker style drawer fronts
Drawer front design 400FC E3-118
Min. width for E3 frame 8-1/4", min. height 4-1/2"
Shown in Cider Cherry finish.

Woodmonrt Doors plywood panel cabinet doors - shaker cabinet drawer fronts
Shown in Cordovan Cherry finish.

Woodmonrt Doors plywood panel cabinet doors - shaker drawer fronts
Shown in Ginger Cherry finish.

Door choices, measuring and installation information, hinge info, and quotation and ordering links are in the top margin of this page. Scroll back up.

Solve your odd size hole center to center problem.
Answers here.

Got 2-3/4", 3-1/2", or any crazy size

We ship orders worldwide.  We have had many customers from Canada, England, Australia and other predominately English speaking nations that we advertise in.  We have shipped all througout Europe, and to several Asian, African, and South American countries.
We ship everywhere:

Tell a friend about our web site!

Navigate back to any section of our web site using these links:

Or navigate by our product category pages:

Close-out products:

HOME > WOODMONT DOORS > Please SELECT from these door and accessory pages while in the WOODMONT DOORS section of our website: (Best viewed on a PC or tablet)

DOORS: Mitered corner raised panel wood doors | M&T corner raised panel wood doors | Shaker style plywood panel wood doors | Wood drawer fronts | Frame only and Mullion wood doors
RTF thermal foil doors | Melamine doors
ACCESSORIES: Wood drawer boxes | Veneer, decorative molding, and cut to size plywood

HELP PAGES: Face frame & frameless cabinets explained | Profile choices for wood doors - frames, panels, edges | How to measure your doors and installation tips | Questions about custom made cabinet doors | Customer testimonials

QUOTES / ORDERING: On-line quotation and ordering form | FAX quotation and ordering form


When you are ready to place your order, please open our on-line ordering form here
Or you can place a phone order from 9 to 5 Mon-Fri EST, call us at 813-633-7544 or 813-362-7898.
You can FAX or mail in orders too.



Eclectic-ware is a distributor of cabinet and bathroom hardware

3110 Turkey Walk Lane
Wimauma, FL  33598  USA
(Greater Tampa to Sarasota area)
Phone: 813-633-7544
FAX: 813-634-3400
website: www.eclectic-ware.com

EclecticWare is a BBB Accredited Home Kitchen Cabinetry Equipment Supplier in Wimauma, FL
A+ rated business since 2003

Customer service hours
& phone (813) 633-7544
and (813) 362-7898 cell
Mon-Fri 9 to 5 E.S.T.
24/7 FAX and on-line ordering.
Anyone can purchase from us!

© Copyright 2000-present ~ John W. Wagonis | Established Dec. 2000 | County license # 146460
Home | Sitemap | Our Blog | Contact Us | About Us | How to order page
Testimonials |
F.A.Q. | Return policy | Privacy policy

Are you a little lost?


Eclectic-ware kitchen cabinet hardware and bathroom accessoriesWoodmont Doors Kitchen Cabinet Doors

813-633-7544 main line -- or 813-362-7898 cell
for phone orders, product questions, & design assistance.





Click here to order. Visa, MasterCard, American Express, Discover card accepted by Eclectic-ware
Click for the BBB Business Review of this Kitchen Cabinets & Equipment - Household  - Shipping throughout the entire USA, Canada, and worldwide

We are a cabinetry and bathroom hardware supply store open to everyone!
Please remember the hyphen (-) in Eclectic-ware and in our web address: www.eclectic-ware.com