Cabinet and Bathroom Hardware Supply Store
For Product Support & Phone Orders:
813-633-7544 landline or 813-362-7898 smartphone
Eclectic-ware in Wimauma, FL
Click our Eclectic-ware logo to return to our home page.
Click to view items in your cart
Title
Go to content

Roll Up Kitchen Appliance Garages [Kitchen Upgrades]

Omega-National section index

Omega-National roll up tambour door appliance garage kits

An appliance garage is a nice way to create an additional storage cabinet under your upper cabinets. They are great for holding items that you would normally store in your base cabinets and would prefer to have at countertop level. Like a toaster, a blender, or even your George Foreman Grill. We placed a rotating lazy susan in one of our corner appliance garages and it is a great space for our various protien powders. A great way to keep them off the counter and out of sight. The tambour roll up doors are easy to move up and down. And with the tension spring, the door stays at the level you put it at. So if you need to open the garage just halfway or any level, you can. You do not need to open it fully every time. Straight garages are much wider than the corner garages and can hold much more. Each garage comes with veneer sidewalls that you can finish to match your cabinets. Your counter top serves as the base of the garage.

Omega-National roll up kitchen appliance garages

About the appliance garage kits

  • Corner garages and straight garages are sold as unassembled kits.
  • Kits are fine sanded and ready for you to finish the side walls, face frame, and the door.
  • Tambour doors are duck-cloth backed and real hardwood veneer over a hardboard core.
  • Kits are designed to fit under the light rails of upper cabinets and attach to them. The base of the walls attach to your countertop with screws, or potentially just glue on granite counters that you cannot drill into.
  • They can be painted, even the door. If choosing to paint a light color, go with the maple units. Maple paints better.
  • Units can be cut down in WIDTH, HEIGHT, AND DEPTH. Specifically designed to fit under 12" deep upper cabinets that are 18" above the counter.

Dimensions:

Corner garage: height = 18"; depth = 11-1/2"; overall front width, outside edges of face frame = 16-3/4"; door opening width approx. 13-3/4".
Straight garage: height = 18"; depth = 11-3/4"; width = 30"; door opening width approx. 26".

Each kit contains:

Two veneer faced wood side panels, two solid wood front stile posts attached to side panels, one veneered tambour door, one pair of face frame tambour door P-tracks, and the  Finger-Lite hardware kit. The patented Finger-Lite hardware kit includes lift spring and bushing (slips over one of the spacer rods and attaches to backside bottom of the door), spacer rods (wooden dowels that hold the P-tracks at a set distance apart), and fasteners (screws to mount the P-tracks to the back of the face frame). Assembly instructions are also included.

Shown first will be the 4 corner units, and then the 4 straight garages.
OMG-A0100CUF1
Manufacturer: Omega-National
Omega A0100CUF1 unfinished corner appliance garage, cherry veneer
Two side walls with attached solid wood face frame, tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$156.23
Add
OMG-A0100HUF1
Manufacturer: Omega-National
Omega A0100HUF1 unfinished corner appliance garage, hickory veneer
Two side walls with attached solid wood face frame, tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$146.23
Add
OMG-A0100MUF1
Manufacturer: Omega-National
Omega A0100MUF1 unfinished corner appliance garage, maple veneer
Two side walls with attached solid wood face frame, tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$134.74
Add
OMG-A0100OUF1
Manufacturer: Omega-National
Omega A0100OUF1 unfinished corner appliance garage, oak veneer
Two side walls with attached solid wood face frame, tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$127.22
Add
OMG-A0160CUF1
Manufacturer: Omega-National
Omega A0160CUF1 unfinished straight appliance garage, cherry veneer
Two side walls with attached solid wood face frame, wider tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$193.92
Add
OMG-A0160HUF1
Manufacturer: Omega-National
Omega A0160HUF1 unfinished straight appliance garage, hickory veneer
Two side walls with attached solid wood face frame, wider tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$191.12
Add
OMG-A0160MUF1
Manufacturer: Omega-National
Omega A0160MUF1 unfinished straight appliance garage, maple veneer
Two side walls with attached solid wood face frame, wider tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$190.17
Add
OMG-A0160OUF1
Manufacturer: Omega-National
Omega A0160OUF1 unfinished straight appliance garage, oak veneer
Two side walls with attached solid wood face frame, wider tambour door with handle, tambour P-track for face frame mount, dowel rods, tension spring, mounting screws.
$175.90
Add
On the OMG-A0160MFU1 shown above, click or tap on that picture. It will show you all the other pictures we have linked to that part number. We took a lot of them so you can see all aspects of the kit. There are also a couple of pictures where we show the door laid over a 5-gallon paint bucket. This is a good way to finish the door. If you lay it over a large curved surface, it allows the V-grooves of the tambour to open up more and you can finish all sides of each slat easier. It is easier to finish it curled than flat. Just do it over a piece of cardboard and not over the carpet like we are showing.

Ordering Notes:

Maple, Oak, and Cherry appliance garages are normally stocked and can ship right away. We generally order the Hickory upon request. Hickory is just not as popular of a wood in kitchens as oak, maple, and cherry are. Anything that we do not have in stock generally takes us 3 to 5 weeks to receive first.

Accessory items and replacement parts

In addition to the garage kits, we also offer the tambour P-tracks that come in the kits separately. This is an item requested as a replacement part regularly. They are plastic, they can age and break if twisted wrong. We have the brown P-tracks that come with the kits which are the face frame mount. For the milky-white P-tracks which are for frameless garage kits, we have chosen NOT to stock those anymore. They were seldom requested, and now we have to buy them by box quantities and can no longer stock just a few pair. So they are discontinued by us.

Additionally, we offer the Finger-Lite Kit. Because many people want to build their own garage kits within a cabinet and do not need the sidewalls, but would like the P-tracks, Finger-Lite Kit, and some tambour.

Lastly, we do offer the tambour door material separately. It comes in a large size. Like roll top desk size.
Details for the roll of tambour:
  • Hardwood veneer door over hardboard core.
  • Unfinished and fine sanded, ready for you to clear coat, stain, or paint.
  • 30 degree V-groove angle between slats.
  • Door material comes in one size only, 37" tall x 47-3/4" wide with 1-1/4" leader strips on top and bottom.
  • The leader strips are a nice area to attach a continous wood pull to them to open and close the tambour.
  • Door can be cut down in width and height. Sized for average roll top desk but can be used for smaller projects.

Note on the tambour door shown below:
Because of the size of this door, if used close to its full size, it is not recommended to be used in the P-tracks or Finger-Lite Kit. Those items are designed for the smaller garage doors (18" heights) in the appliance garage kits. If using Tambour in larger sizes, you will want to use plastic or aluminum P or L track, or fabricate your own channel with wood.
We do not supply tambour door tracks other than the small P-tracks shown below.
OMG-T0180CUF2
Manufacturer: Omega-National
Omega T0180CUF2 hardwood veneer tambour door, unfinished cherry
47-3/4'' wide x 37'' high, duck cloth back, hardboard core, 30 degree groove angle
$193.24
Add
OMG-T0180HUF2
Manufacturer: Omega-National
Omega T0180HUF2 hardwood veneer tambour door, unfinished hickory
47-3/4'' wide x 37'' high, duck cloth back, hardboard core, 30 degree groove angle
$276.82
Add
OMG-T0180MUF2
Manufacturer: Omega-National
Omega T0180MUF2 hardwood veneer tambour door, unfinished maple
47-3/4'' wide x 37'' high, duck cloth back, hardboard core, 30 degree groove angle
$177.48
Add
OMG-T0180OUF2
Manufacturer: Omega-National
Omega T0180OUF2 hardwood veneer tambour door, unfinished oak
47-3/4'' wide x 37'' high, duck cloth back, hardboard core, 30 degree groove angle
$170.17
Add
OMG-T04019002-W01
Manufacturer: Omega-National
Omega T04019002-W01 Track for tambour doors 18-1/4'' length conventional face frame mount - sold as pair (L/R) BROWN (this is the track that comes in the appliance garage kits)
$15.84
Add
OMG-T04029002-W01
Manufacturer: Omega-National
Omega T04029002-W01 Finger-Lite kit for tambour doors
Consist of: spring on bushing, 2 spacer rails, fasteners, instructions
(Does not contain the tambour tracks.)
$22.97
Add

Ordering Notes on the parts:

We keep the brown P-tracks in stock. As well as several of the Finger-Lite Kits. On the rolled tambour doors, we try to keep one or two each on hand in the oak, maple, and cherry. Hickory is ordered as needed or direct shipped. We try to keep the three popular woods in stock for faster shipments.
Back to content