Cabinet and Bathroom Hardware Supply Store
For Product Support & Phone Orders:
813-633-7544 landline 813-362-7898 smartphone
Eclectic-ware in Wimauma, FL
Click our Eclectic-ware logo to return to our home page.
Click to view items in your cart
Title
Go to content

Brushy Creek Doors Thermal Foil Mini Quote Form

Brushy Creek Custom Doors section index

Brushy Creek Custom Doors MINI Quotation Form - 3D Laminate requests

This form is used for quotations and orders both - for shorter requests. If you need only a few doors or drawer fronts, use this form. It will be much shorter than our normal quotation and ordering form. Submission fields will be limited to door and drawer fronts only, and just a few lines for each. We know sometimes that is all you need. So we removed all the fluff from this form.

All submissions will be treated as a quotation first so we can supply you with pricing. Then after we communicate back and forth, you can decide if you would like to proceed as an order. Form results will come to us, then a real person will calculate pricing for you. It is VERY important to enter your e-mail address and phone number correctly.

For Brushy Creek wood doors, you should use the Wood Door Quotation and Order Form.
This page is for Thermal Foil Doors (3D Laminate).
There will be a few helpful notes and guides in blue print in the form. There will be a comments fields that you can free type notes to us.

The auto-responder e-mail is triggered to send back your submission data in an e-mail. When we respond to your door quote / order request via e-mail, we will include your collected data too. Why? Because you need to really look it over and make sure all measurements and info are correct. All doors are custom made. Everything is custom made. So we will communicate back and forth and double check the data, as well as you will double check the data entered.

Some tips about filling out the form:
Enter your measurement numbers with fractions as: 15-3/16 or 8-1/4 or 28-7/8. No need to use the (") sign after your measurements. Measurements are entered in inches. Separating a whole number and fraction with a dash (-) is a very clear way of doing it. If you enter 15 3/16 or 8 1/4, we will still know what it is. But the (-) sign helps. Also, numbers like 15.1875 and 8.25 are acceptable, but fractions are preferred.

Some fields have drop down choices for easier selections rather than you typing everything. Yet some drop downs, like for the 3D Laminate colors would be a list of 70 names. So you do have to type some things on your own.

It is important to have your complete SHIP TO address filled in as it is necessary to calculate the shipping cost.

** If you need to go back to a Brushy Creek Custom Doors product or reference page for some clarity, links to these pages are at the bottom of this page. For Windows users on a PC, if you choose to RIGHT CLICK on a link, it gives you a short pop up where you can choose to open a page in a new tab or window. Thus, this form will stay conveniently open for you.

The form (when filled out) can be printed and then faxed to us, or mailed to us. But the Send Your Brushy Creek submission button at the end of the form will send your info immediately to us.

This form is used for both orders and quotation requests. When you reach the end and submit the form, the refresh page that comes up after will give you a little more information about what happens next.











Now you will begin information about your Door and Drawer fronts: a) design, b) profile, c) color, d) hinge boring, etc. If there is info you need to convey that the form fields do not neatly accept, there will be a comments field at the end of this form and you can free type any info that you need to.

Enter measurements in inches as numbers with fractions, or decimal equivelants. Whichever you find easier.

FIRST: WHICH DOOR STYLE ARE YOU CHOOSING?



Next: If you selected a Raised Panel Door Style, please let us know which Raised Panel PROFILE you would like. (If you selected a recessed panel or slab door, you will not select a raised panel profile.)

Select your Edge choice too for raised panel, recessed panel, and standard slab design.



3D Laminate Color Choice: Enter the color number and color name as displayed on the 3D Laminates color page. THEN, tell us about the back of the door: white or black melamine, or matching color back.


NOW we are ready for your door quantities and sizes. For hinge boring, you can leave it unchecked if you DO NOT WANT hinge boring. And then in the OPTIONS FIELD you can enter notes such as: 3mm or 6mm for hinge boring choice (if you need hinge boring), Finger Pulls (on top or bottom), or Frame Only for Frame Only Doors. Or Mullion ML4, ML6, etc. for Mullion Doors and the number of Lites you need. (Frame only and mullion doors, routed out on the back, yes, no. Enter that too.) Extra room in the comments field at the bottom of the form if anything else needs to be said. (There is room for 7 lines - MINI form. If extras lines are needed, use the comments field, e-mail us, or send a continued submission with a fresh form.)
Door Line 1





Door Line 2





Door Line 3





Door Line 4






For those who have need of only a few lines, you can skip to the drawer front section or to the end of the form.

Door Line 5





Door Line 6





Door Line 7





NOW: Drawer Front information. Drawer fronts are easier. You will tell us if you are looking for a) matching raised panel front, b) matching recessed panel front, c) slab front. The 3D Laminate color will be presumed to be the same as the doors (if you have door selections). The backs can be white or black melamine, or a matching back (which is not common on drawer fronts). AND edge choices will be presumed to be the same as the doors. The OPTIONS FIELD can have comments to differ from the above if you like. And you can add notes about finger pull routing if required.

AND GRAIN DIRECTION: tell us if you need horizontal grain or vertical grain on 3D Laminate colors that have a grain direction.



DF Line 1




DF Line 2




DF Line 3




DF Line 4






NOTE: In the hinge comments or clarity field above, you can note if you need hinge boring 3mm or 6mm from the edge distance. Important: face frame hinges for 1/2" overlay normally will have 3mm. Frameless cabinets with full overlay, usually 5/8", will have a 6mm bore distance.

Commercial customers: If you need to tag a job name or reference to this submission, you can do so here.


Back to content